Electric Water Pump( $155.99 )

Aluminum water pumps directly replace conventional belt-driven pumps to free up to 15 horsepower. Pump deliver 35 GPM, include fittings and are powder coated black, blue, and red, polished or chrome plated.

Available SBC, BBC, SBF

Pit Socket with Extension( $39.99 )

No more extensions slipping off. 1" hex socket is 12" in length. Clears beadlock ring on Weld Wheels. 1/2" drive.

Castrol SRF brake fluid( $60.99 )

Castrol SRF brake fluid has a wet boiling point of 518 deg. F (270 deg. C) which exceeds DOT 3 and 4 standards. Do not mix Castrol SRF and other brake fluids, as this will reduce the benefits of Castrol SRF. Sold in 1 liter containers (33.8 ozs.)

3/16 Double Ended Drill Bits( $5.59 )

3/16" double ended drill bits. A must for every racer's tool-box. Package of 6

Competitive Edge( $36.00 )

Competitive Edge Tire Treatment

Chemically treats and softens race tires to increase traction without making tires greasy. Apply race day or night before on new or old tires. Use on the inside or outside. One gallon container treats 4 to 6 tires.

3/16 Alum/Alum Expoding rivets( $28.95 )

Flange style exploding rivet

Available in natural aluminum, white, and black. New style rivets star out when popped and do not require any kind of back-up washer.

Ground Clearance Indicator( $5.99 )

Determine how close the frame is to the ground on the race track. These unique kits feature an aluminum bracket that rivets/bolts to the frame with an adjustable plastic rod. Sold each.

Replacement Components

ALL10726..............Replacement Wear Rods, 4-Pack.

Coil Over Thrust Bearing( $15.99 )

Kit installs between the spring and the coil-over nut to enable easier turning of the nut under pressure. A must with coil bind, soft springs setups. 2.5" I.D. x 3.25" O.D. 

8500 Series 10-spline Quick Change Gears from 10( $53.99 )

Winters 10-spline, quick change gears, for use with 10" dia. ring gear are 1-3/8" wide, and machined, broached and hobbed from quality SAE 8620 steel by Winters technicians. Sets 50 thru 58 are for limited horsepower applications only. Winters also has an attractive poster (WINPOSTER10) which displays all available gear sets and ratios, an ideal reference chart for the wall of any race shop.

Bassett 15x8 IMCA Interia wheel( $56.99 )

The lowest runout (under .030") wheel on the market. "Inertia Advantage" wheels concentrate the strength and weight of the wheel towards the center which makes then 5% faster than any other available. Unique design provides 10 more square inches of brake cooling area. Black, silver or chrome 15" x 8" wheels are affixed with the IMCA decal weigh 19lbs

Available in 5x5, 5x4.75, & 5x4.5 bolt patterns and 1",2",3",4" & 5" offsets.

Black, silver, and chrome (additional charge)

Hypercoils( $49.99 )

Hyperco Coil Springs are recognized by top competitors worldwide as one of the best available. Hyperco starts with the highest quality wire. Inspections are performaed before, during and after manufacturing to meet stringent quality standards. All Hypercoils are dark blue powder coated and etched with the rate.

2.5" I.D. coil-overs available in 4",7",8",10",12" & 14" with rates starting at 110lbs and going to 850lbs depending on height.

4 Tire Rotisserie( $640.00 )

The Tire Rotisserie features heli-arc aluminum frame, knurle steel shafts, and a gear driven motor. 53.5" inside pan side to side.

-Hands-off application

-Saves Time

-Tire Treatment goes farther

-Safer and cleaner

-Hassle-free

-Provides consistency of application

Butler E-Z Sportsman Seat( $659.99 )

Adjustable Base Plate( $58.99 )

The "Governor" is a 1" thick, four hole aluminum spacer with replaceable tapered inserts (sold serperately) which can be quickly changed after carb is removed. Restricts air/fuel entry and reduces power slightly to prevent wheel spin. Inserts range in size from .0950" to 1.400" for custom tailoring and quicker lap times. Fit all Holler 4bbl. 4150/4160 series carburetors.